JVC MP-XV841 Instructions Manual Download Page 100

Page: 100 / 232

100

How can I check the MAC address?

Proceed as follows to check the MAC address of the PC’s wireless LAN.

* In order to check the MAC address, the wireless network connection must first be set

using [Network Connections].

Click the [Start] menu, and click [Control Panel].

Click the [Network and Internet Connections] icon.

Click the [Network Connections] icon.

Check that [Wireless Network Connections] is enabled.

Double-click [Wireless Network Connections].
The “Wireless Network Connection Status” screen appears.

Click the [Support] tab, and click the [Details] button.
The [Network Connection Details] screen appears.

The value for “Physical address” displayed on the list indicates the MAC address.

Battery

The battery is not charged.

Check the following.

•

When the battery cannot be charged

•

When the lithium-ion battery pack cannot be charged

For how to mount the lithium-ion battery pack, see “Mounting/Dismounting the Lithium-

Ion Battery Pack” on page 16.

If you are still unable to charge the battery pack, check the following.

Check that the AC adapter is connected correctly to an appropriate power socket and the

PC unit.

For connection, see “3. Recharge the battery pack by plugging the AC cord into DC Input

connector” on page 17.

Battery discharge faster than expected.

• This device continues to supply DC current to the USB port in standby in order to

respond to the wake-up signals from some USB peripherals.
If you keep this device in standby for a long time with just battery power, please remove
peripherals from the USB port.

• If there is no external peripherals connected battery may need to be replaced.

TROUBLESHOOTING

XP841US̲088̲115.p7.0J

04.5.21, 6:32 PM

100

Summary of Contents for MP-XV841









































































































































































































































Search results

Summary of Contents for MP-XV841

Reviews:

JVC MP-XV841, Instructions Manual, Page: 100 / 232

Search results

Summary of Contents for MP-XV841

Reviews: