JVC MP-XV841 Instructions Manual Download Page 184

Page: 184 / 232

Click the [OK] button.
A message prompting you to restart the computer will appear.

Click the [OK] button to make the change take effect.

Restart the computer.

•

Checking the MAC address

Use the following procedure to check the MAC address of the internal LAN card.

Important

To check the MAC address, you have to set a LAN (local area) connection in the [Network
connection] screen.

Click the [start] button and [Control Panel].

Click the [Network and Internet Connections] icon.

Click the [Network Connections] icon.
With the correct LAN connection, the following screen will appear.

Check that [Local Area Connection] is enabled.

Tips

If it is disabled, move the mouse pointer to [Local Area Connection] and press the right
mouse button to bring up a menu, click [Enable] to enable the connection.

HARDWARE

Summary of Contents for MP-XV841









































































































































































































































Search results

Summary of Contents for MP-XV841

Reviews:

JVC MP-XV841, Instructions Manual, Page: 184 / 232

Search results

Summary of Contents for MP-XV841

Reviews: