JVC MP-XV841 Instructions Manual Download Page 178

Page: 178 / 232

HARDWARE

Using the DVD-ROM & CD-R/RW drive

This PC comes with a DVD-ROM & CD-R/RW drive.

Types of discs supported

●

DVD-RAM: Use discs bearing the

mark.

●

DVD-ROM: Use discs bearing the

mark.

●

DVD-R: Use discs bearing the

mark.

●

DVD-RW: Use discs bearing the

mark.

●

DVD-Video: Use discs bearing the

mark.

●

Video CD: Use discs bearing the

mark.

●

CD-R: Use discs bearing the

mark.

●

CD-RW: Use discs bearing the

High Speed

Ultr

a Speed

mark.

●

CD-ROM: Use discs bearing the

mark.

●

Music CD: Use discs bearing the

mark.

* It may not be possible to read discs under some circumstances (depending on such factors as the recording

quality, the presence of scratches, dirt or deformation and copy protection).

Inserting the discs

1. Press the

(On/Off) key to turn on the PC's power.

2. Press the Eject button, and pull out the open disc tray.

• Remove the protective sheet which was used when the PC was in transit.

Eject button

Summary of Contents for MP-XV841









































































































































































































































Search results

Summary of Contents for MP-XV841

Reviews:

Related manuals for MP-XV841

Brands by name

Popular brands

JVC MP-XV841, Instructions Manual

Search results

Summary of Contents for MP-XV841

Reviews:

Related manuals for MP-XV841

Brands by name

Popular brands