manualshive.com logo in svg

JVC MP-XV841, Instructions Manual, Page: 120 / 232

Share
Download
JVC MP-XV841 Instructions Manual Download Page 120

4

 EN

Mobile Mini Note PC with Radio Local Area Network (RLAN)

OPERATING AT 2412 TO 2462 MHz

• This equipment with RLAN is intended to be used in Germany, UK, Austria and Switzerland.

Outdoor use may be restricted to certain frequencies and/or may require a licence for operation.

0197

European Community, Switzerland, Norway, Iceland, and Liechtenstein

Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC

CAUTION FOR LASER

This product utilizes laser.
Use of control, adjustment or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
Do not open covers and do not repair yourself. Refer servicing to qualified personnel.

Laser properties of the Drive

Laser class:

Class 1 (HHS and IEC825-1)

Wavelength:

for CD

783 nm

for DVD 650 nm

XP831GB̲002̲022.p7.0J

04.5.11, 10:48

4

Summary of Contents for MP-XV841









































































































































































































































Reviews:

No comments