manualshive.com logo in svg

JVC MP-XV841, Instructions Manual, Page: 155 / 232

Share
Download
JVC MP-XV841 Instructions Manual Download Page 155

EN 

39

The Internet Connection Setup

Use the following procedure to connect your PC to the Internet network.  This setup example
uses the built-in modem of your PC and Microsoft’s Internet Explorer (IE) for the Internet
connection. If you have already contracted with a provider, you can manually set up the Internet
connection using the following procedure.

Tips

As your PC has networking functions, you can connect it to the Internet via the network.  For the
setup procedure, when you connect to the Internet via a network, see Page 66.

1. Click [start] and then click [Internet] in the upper left part of the Menu.

The “Welcome to the New Connection Wizard” screen will appear.

Tips

If the “Welcome to the New Connection Wizard” screen does not appear, click the [start] button
and select [All Programs], [Accessories], [Communications] to start [New connection wizard].

2. Click [Next].

The “Network Connection Type” screen will appear.

Continue to next page

Summary of Contents for MP-XV841









































































































































































































































Reviews:

No comments