background image

2

 EN

It is recommended that you . . .

.... read thoroughly the Safety Precautions. They contain extremely important information regarding the safe

use of this product.

SAFETY PRECAUTIONS

NOTES:

The rating plate (serial number plate) and safety
caution are on the bottom and/or the back of
the main unit.

The rating information and safety caution of the
AC Adapter are on the bottom of the adapter.

Dear Customer,

Thank you for purchasing this Mobile Mini Note PC. Before use, please read the safety information and
precautions contained in the following pages to ensure safe use of this product.

Hereby, JVC declares that this equipment is in compliance with the essential requirements and other
relevant provisions of Directive 1999 / 5 / EC.

The modem incorporated in this product was tested according to the standard TBR21.
The correct function on a public analogue telephone line and a wireless LAN network is confirmed with
the listed cautions.
Should you have any problem on a specific network, we kindly ask you to inform your JVC
Service Centre the nature of the problem and details of which service provider you are using.

WARNING
DANGEROUS VOLTAGE INSIDE

CAUTIONS:

To prevent shock, do not open the cabinet. No
user serviceable parts inside. Refer servicing to
qualified personnel.

When you are not using the AC Adapter for a
long period of time, it is recommended that you
disconnect the power cord from the AC outlet.

CAUTION:

To avoid electric
shock or damage to
the unit, first firmly
insert the small end of
the power cord into
the AC Adapter until it
is no longer wobbly, and then plug the larger
end of the power cord into an AC outlet.

IMPORTANT

 for the U.K.

DO NOT 

cut off the mains plug from this equipment. If

the plug fitted is not suitable for the power points in your
home or the cable is too short to reach a power point, then
obtain an appropriate safety approved extension lead or
consult your dealer.

BE SURE 

to replace the fuse only with an identical approved

type, as originally fitted.
If, nonetheless, the mains plug is cut off be sure to re-
move the fuse and dispose of the plug immediately, to
avoid a possible shock hazard by inadvertent connec-
tion to the mains supply.
If this product is not supplied fitted with a mains plug then
follow the instructions given below:

IMPORTANT.
DO NOT 

make any connection to the terminal which is

marked with the letter E or by the safety earth symbol or
coloured green or green-and-yellow.
The wires in the mains lead on this product are coloured
in accordance with the following code:

Blue :

Neutral

Brown :

Live

As these colours may not correspond with the coloured
markings identifying the terminals in your plug proceed
as follows:
The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or coloured
black.
The wire which is coloured brown must be connected to
the terminal which is marked with the letter L or coloured
red.

IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.

WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.

This unit should be used with 110 – 240 V~, 50/60 Hz
only.
CAUTION: To prevent electric shocks and fire hazards,
do NOT use any other power source.

CAUTIONS:

If used near a radio, this unit may interfere with reception.

Prevent inflammables, water and metallic objects from
entering the unit.

Do not disassemble or modify the unit.

Do not apply shocks to the unit.

Do not subject the unit to direct sunlight.

Avoid using the unit in extremely hot or humid places.

Avoid using the unit in places subject to vibrations.

XP831GB̲002̲022.p7.0J

04.4.28, 12:48

2

Summary of Contents for MP-XV841









































































































































































































































Reviews: