JVC MP-XV841 Instructions Manual Download Page 183

Page: 183 / 232

Double-click [Local Area Connection].
The “Local Area Connection Status” screen will appear.

Click the [Properties] button.
The “Local Area Connection Properties” screen will appear.

On the [General] tab, double-click [Internet Protocol (TCP/IP)].
The “Properties of Internet Protocol (TCP/IP)” screen will appear.

Enter appropriate values in the [Use the following IP address] and [Use the following
DNS server addresses] fields.

Click the [OK] button to save the setting.

•

Setting a computer name or work group

Tips

To share data or a printer among a group of computers, you must set the computers in the
same work group. This enables you to transfer data between computers.

Click the [start] button and [Control Panel].

Click the [Performance and Maintenance] icon.

Click the [System] icon.

The “System Properties” screen will appear.

Click the [Computer Name] tab.

Click the [Change] button.

Change the “Computer name” and/or “workgroup” as necessary.

Click the [OK] button to save the setting.
The “Change in computer name” screen containing the “Welcome to the ***
workgroup.” message will appear.

Continue to next page

Summary of Contents for MP-XV841









































































































































































































































Search results

Summary of Contents for MP-XV841

Reviews:

Related manuals for MP-XV841

Brands by name

Popular brands

JVC MP-XV841, Instructions Manual

Search results

Summary of Contents for MP-XV841

Reviews:

Related manuals for MP-XV841

Brands by name

Popular brands