manualshive.com logo in svg

JVC MP-XV841, Instructions Manual, Page: 32 / 232

Share
Download
JVC MP-XV841 Instructions Manual Download Page 32

32

 EN

JVC ORIGINAL SOFTWARE AND SYSTEM APPLICATIONS

䢇

InterVideo WinDVD 5 for JVC

WinDVD 5 with Dolby Virtual Speaker and Dolby Headphone is a software DVD player
which is extremely easy to use.  It combines all the advantages of a regular DVD player found
in the home with a number of advanced functions available only with software DVD players.
Audio CDs and video CDs can be played using WinDVD 5.

Caution

DVD-Video play may become unstable immediately after the WinDVD 5's settings have been
changed.

䢇

UltraPOST

This self-diagnosis tool is incorporated inside the BIOS.  It enables the self-diagnosis of the
hardware without involving the use of any media.
Use it at times when the operations need to be checked such as when memory is added or
trouble is suspected.
For details, refer to “Using the UltraPOST self-diagnosis tool” on page 86.

XP841US̲023̲035.p7.0J

04.5.21, 6:26 PM

32

Summary of Contents for MP-XV841









































































































































































































































Reviews:

No comments