JVC Connected Cam GY-HC500E Instructions Manual Download

Page: 88 / 268

Dual Rec

If both the slots are loaded with recordable cards

in the Dual Rec mode ([Slot Mode] is set to

“Dual”), pressing the [REC] button starts

recording simultaneously to the media in both

the slots.

The clips recorded to the media in both the slots

are identical, and two clips of the same content

can be created only on this camera recorder.

(

P160 [ Slot Mode ] )

Setting to Dual Rec Mode

Set [System]

[Record Set]

[Slot Mode]

to “Dual”.

(

P160 [ Slot Mode ] )

Start recording.

Insert recordable media in both slots, and

press the [REC] button.

In the Dual Rec mode, recording to the media

in both slots starts at the same time.

Both the card slot marks turn red, and the

status indicators of both the card slots also

light up in red.

100min

50min

282min

1/ 60

F2. 8

1 /64

12 :34 : 56

ISO

102400

00: 00: 00.00

5 . 6f t

B 5600

4030 20

Lit in red

Stop recording.

Press the [REC] button again.

Recording to both slots stops, and both the

card slot marks turn white.

The same clips are recorded to both cards.

100min

50min

282min

1/ 60

F2. 8

1 /64

12 :34 : 56

ISO

102400

00: 00: 00.00

5 . 6f t

B 5600

4030 20

White

Memo :

During recording in the Dual Rec mode, both the

card slot marks light up in red.

During recording in the Dual Rec mode to two

cards with a different amount of remaining

space, if the space of one card runs out,

recording to both slots will stop automatically.

After recording stops, recording automatically

resumes for the card with remaining space.

Although the clips are separated in this case, the

clips can be seamlessly joined by arranging

them on the timeline of the editing software since

they are recorded seamlessly.

If the last clip on the cards that are inserted in the

two slots are different from each other, and the

time code operating mode is set to “Regen”, the

Regen mode for the selected card slot will be

enabled in the next recording.

When [

Format] is set to “High-Speed”, “Dual”

cannot be selected.

Dual Rec

Shooting

Summary of Contents for Connected Cam GY-HC500E













































































































































































































































































Search results

Summary of Contents for Connected Cam GY-HC500E

Reviews:

Related manuals for Connected Cam GY-HC500E

Brands by name

Popular brands

JVC Connected Cam GY-HC500E, Instructions Manual

Search results

Summary of Contents for Connected Cam GY-HC500E

Reviews:

Related manuals for Connected Cam GY-HC500E

Brands by name

Popular brands