JVC Connected Cam GY-HC500E Instructions Manual Download

Page: 141 / 268

Server

For selecting the server for live streaming.

[Setting Values:

Server1, Server2, Server3,

Server4]
Memo :

The setting cannot be changed during live

streaming (when [Live Streaming] set to “On”).

Streaming Server

For setting the server for live streaming.
Memo :

The setting cannot be changed during live

streaming (when [Live Streaming] set to “On”).

Server1, Server2, Server3, Server4

* The name that is set in [Alias] is displayed

individually.

Alias

For setting a name to distinguish the settings of this

camera.

The name set in this item will be displayed in the

[Server] options.
*1 The default value is “Server1/Server2/

Server3/Server4”.

*2 You can enter up to 31 characters and ASCII

characters.

Type

For configuring the system for transferring video

and audio to be distributed.

[Setting Values:

MPEG2-TS/UDP, MPEG2-TS/

TCP, MPEG2-TS/RTP, RTSP/RTP, ZIXI(SRT),

RTMP, RTMPS, Facebook Live, YouTube Live]

[Setting Values:

MPEG2-TS/UDP, MPEG2-TS/

TCP, MPEG2-TS/RTP, RTSP/RTP, SRT, RTMP,

RTMPS, Facebook Live, YouTube Live]

Memo :

Use reception devices that are compatible with

the respective transfer systems.

To use the “ZIXI” setting, a dedicated server is

needed separately.

The GY-HC550 is a model that is equipped with

the Zixi protocol, thus SRT protocol update

needs to be performed before using the SRT

protocol. Doing so will make the Zixi protocol

unusable.

To enable the use of the Zixi protocol again,

perform Zixi protocol update.

The following items that can be set vary

depending on the setting of this item.

Connection Mode

For configuring the SRT connection mode.

[Setting Values:

Caller, Listener, Rendezvous]

Memo :

This item is selectable only when [Type] is set to

“SRT”.

Destination Address

For setting details such as the host name and the

IP address of the live distribution destination.
* Enter not more than 127 characters using

single-byte alphanumeric characters (a to z, 0 to

9), single-byte hyphen [-], or dot [.].

Destination URL

For entering the URL of the live distribution

destination beginning with “rtmp://” or “rtmps://”.

There is no default value (blank).
* You can enter up to 191 characters and ASCII

characters.

Memo :

Available when [Type] is set to “RTMP” or

“RTMPS”.

Destination Port

Enter the network port number of the live

distribution destination using an integer between 1

and 65535.

When [Type] is set to “MPEG2-TS/UDP”, “MPEG2-

TS/TCP” or “MPEG2-TS/RTP”, the default value is

“6504”. If “ZIXI” is set, the default value is “2088”.
Memo :

When [Type] is set to “MPEG2-TS/RTP”, only

even numbers from 2 to 65530 can be specified

for the port number.

When [Type] is set to “MPEG2-TS/RTP” and

[SMPTE 2022-1 FEC] is set to “On”, N+2 and N

+4 port numbers are also used in addition to the

specified port number (N).

Network Menu

141

Menu Display and Detailed Settings

Summary of Contents for Connected Cam GY-HC500E













































































































































































































































































Search results

Summary of Contents for Connected Cam GY-HC500E

Reviews:

Related manuals for Connected Cam GY-HC500E

Brands by name

Popular brands

JVC Connected Cam GY-HC500E, Instructions Manual

Search results

Summary of Contents for Connected Cam GY-HC500E

Reviews:

Related manuals for Connected Cam GY-HC500E

Brands by name

Popular brands