Jungheinrich DFG 316s, Operating Instructions Manual, Page: 92 / 187

93
05.10 EN
4.13 Safety instructions for operating additional attachments
Z
Optionally, trucks can be fitted with one or more auxiliary hydraulic functions to
operate attachments. The auxiliary hydraulics are indicated with ZH1, ZH2 and
ZH3.
Auxiliary hydraulic functions for exchangeable equipment are fitted with
replacement couplings on the fork carriage. To fit exchangeable equipment (see
"Assembly and hydraulic ports of additional attachments" on page 100).
DANGER!
Attaching exchangeable equipment can result in accidents.
Other people can be damaged by attaching exchangeable equipment. Use only
exchangeable equipment which has been deemed safe after a risk analysis carried
out by the owner.
X
Only use attachments with a CE mark.
X Only use attachments that have been designed by the attachment manufacturer for
use with the respective industrial truck.
X Only use attachments that have been fitted for the purpose by the owner.
X
Make sure the operator has been instructed in the use of the attachment and that
he uses it for its correct purpose.
X Re-assess the residual capacity of the truck and if it has been altered, attach an
additional capacity plate to the truck.
X Note the attachment manufacturer’s operating instructions.
X
Only use attachments that do not restrict visibility in the travel direction.
Z
If visibility in the travel direction is impaired, the owner must carry out a risk analysis
to assess whether the truck needs to be fitted with auxiliary equipment such as a
camera system or mirrors. If such equipment is used, spend sufficient time
practicing travelling with them.