Jungheinrich DFG 316s, Operating Instructions Manual, Page: 83 / 187

05.10 EN
84
4.10 Replacing the forks
WARNING!
Risk of injury
You can injure your legs when replacing the forks.
X
Never pull the forks towards your body.
X
Always push the forks away from your body.
X Secure heavy forks with lifting slings and a crane
before pushing them down from the fork carriage.
X
After replacing the forks fit the retaining bolts (127) and make sure the bolts are
seated correctly. Retaining bolt torque: 85 Nm.
WARNING!
Trapping hazard
There is a trapping hazard when you
perform this operation.
X
Wear work gloves and safety shoes.
Replacing the forks
Requirements
– Load handler lowered and forks not touching
the ground.
Procedure
• Disassemble the retaining bolts (127).
• Loosen the fork stop (126).
• Carefully push the forks off the fork carriage.
The forks are now dismantled from the load carriage and can be replaced.
127
126