Jungheinrich DFG 316s, Operating Instructions Manual

Page: 154 / 187

155
05.10 EN
6.5 Checking the wheel attachments.
WARNING!
Using different tyres can cause accidents
The quality of tyres affects the stability and performance of the truck.
X
The diameter of the wheels must differ by no more than 15 mm.
X
Always replace tyres in pairs. After replacing the tyres check the wheel nuts are
secure after 10 service hours.
X
Always use tyres of the same make, model and profile.
Checking the wheel attachment
Requirements
– Prepare the truck for maintenance and
repairs ((see "Preparing the truck for
maintenance and repairs" on page 151)).
Tools and Material Required
– Torque wrench
Procedure
• Torque the wheel nuts (137) crosswise with
a torque wrench, for torques (see "Tyre type"
on page 24).
The wheel attachment is now checked.
Z
When using pneumatic tyres check the air pressure, for the air pressure (see "Tyre
type" on page 24)
137