Jungheinrich DFG 316s, Operating Instructions Manual, Page: 11 / 187

05.10 EN
12
3 Approved application conditions
DANGER!
Do not exceed the permissible surface and spot load limits on the travel routes.
At blind spots get a second person to assist.
The driver must ensure that the loading ramp / bridge cannot move or come loose
during loading / unloading.
– Operation in industrial and commercial environments.
– Permissible temperature range -20 to 40°C.
– Operation only on secure, level surfaces with sufficient capacity.
– Operation only on routes that are visible and approved by the proprietor.
– Negotiating inclines up to a maximum of 15 %.
– Do not negotiate inclines crosswise or at an angle. Transporting loads downhill.
– Operation in partially public traffic.
WARNING!
Extreme conditions
X
Special equipment and authorisation are required if the truck is to be constantly
used in extreme conditions, especially in dusty or corrosive atmospheres.
X
The truck is not authorised for use in areas at risk of explosion.
X
In adverse weather conditions (thunder, lightning) the industrial truck must not be
operated outside or in endangered areas.