Jungheinrich DFG 316s Page 170 Operating Instructions Manual Download

Page: 170 / 187

171

05.10 EN

Replace air filter cartridge

Procedure

• Undo the 2 mounting clamps (221) and

remove the dust collector pot.

• Carefully remove the air filter cartridge from

the filter housing.

Cleaning the filter housing

Procedure

NOTE

A faulty engine can cause malfunctions

Do not clean the air filter housing with compressed air.

Always use a clean cloth to clean the air filter housing.

• Remove the air filter cartridge.
• Thoroughly clean the dust collector pot, to do this remove the dust extraction valve.
• Carefully clean the air filter housing with a clean cloth.

There must be no residue from the cloth in the air filter housing.

• Insert the air filter cartridges back in the filter housing.

Take care not to damage the air filter cartridges when assembling.

• Fit the rubber element back into the dust collector pot.
• Insert the dust collector pot and secure it with the 2 mounting clamps (221).

221

Summary of Contents for DFG 316s




























































































































































































Search results

Summary of Contents for DFG 316s

Reviews:

Related manuals for DFG 316s

Brands by name

Popular brands

Jungheinrich DFG 316s, Operating Instructions Manual

Search results

Summary of Contents for DFG 316s

Reviews:

Related manuals for DFG 316s

Brands by name

Popular brands