137
05.10 EN
**Attention: Replace the toothed belt every 3000 service hours and replace the water
pump as well if necessary. Failure to do so could damage the engine.
4.6
Check the coolant level and top up if necessary.
t
4.7
Test the hydraulic fans and check for leaks.
t
4.8
Check and clean the radiator.
t
4.9
Check the wheel suspension and attachment.
t
4.10 Check the tyres for wear and damage.
t
4.11 Check the tyre air pressure and top up if necessary.
t
4.12 Check the air filter and replace if necessary;
t
4.13 Replace the air filter.
t
4.14 Replace the fuel filter.
t
4.15 Test the fuel system and check for leaks and damage.
t
4.16 Check the wheel motor attachments.
t
4.17 Test the starter and generator, check the wires and attachment.
t
4.18 Check V belt / multi-V belt is tensioned and check for damage.
t
4.19 Replace the engine oil filter.
t
4.20 Check the engine for noise and leakage.
t
4.21 Replace the engine oil.
t
4.22 Check the toothed belt*.
t
4.23 Check the engine oil level, top up if necessary.
t
4.24 Check the engine suspension.
t
4.25 Check the glow plugs.
t
4.26 Check the fuel/water separator and discharge if necessary.
t
4.27
– The particle filter system check must only be performed by
specialist personnel.
Clean the particle filter in accordance with the manufacturer's
instructions.
Check and clean the components in accordance with the
manufacturer's instructions.
t
Maintenance intervals
Standard =
t
W A
B
C
Travel
Summary of Contents for DFG 316s
