Jungheinrich DFG 316s, Operating Instructions Manual

Page: 160 / 187

161
05.10 EN
Draining the engine oil
Procedure
• Remove the floorboard.
• Unscrew the filler cap (206).
• Thoroughly clean the oil drain plug (205)
and around the drain hole.
• Unscrew the oil drain plug.
• Collect any oil that emerges.
• Screw in the oil drain plug with a new
seal (torque 30 Nm).
Replace the engine oil filter
Procedure
• Unscrew and remove the oil filter lid
(207).
• Remove the oil filter from the oil filter
housing (208).
• Collect any oil that emerges.
• Thoroughly clean the raised faces of the
oil filter housing and oil filter lid.
• Insert a new oil filter in the oil filter
housing.
• Apply a thin layer of oil to the seal of the
oil filter lid.
• Torque the oil filter lid to 25 Nm.
Adding engine oil
Procedure
• Add fresh engine oil through the filler
port (206) in accordance with the
consumables table.
• Check the engine oil level with the
dipstick (204) and top up if necessary,
(see "Consumables" on page 149).
• Screw the filler cap back on.
• Attach the floor plate.
205
MIN
MAX
206
207
208
MIN
MAX
206
204