Jungheinrich DFG 316s, Operating Instructions Manual

Page: 124 / 187

125
05.10 EN
7.2.2 Release the parking brake.
WARNING!
Uncontrolled truck movement
When the brakes are released the truck must be parked securely on a level surface,
since the brakes are no longer effective.
X
Do not release the parking brake on slopes or inclines.
X Apply the brake again when you reach your destination.
X
Do not park the truck with the parking brake released.
Releasing the Brake
Requirements
– Turn the Emergency Disconnect switch and
key switch off.
– Prevent the truck from rolling away.
– Open the floor plate (184) by undoing the
quick release locks and remove the plug
connections (185).
Procedure
• Undo the setscrew on the valve block (186) a
maximum of 1.5 turns.
• Fully insert the setscrew (187) (torque 2.5
Nm).
• Turn the steering wheel clockwise.
• Fully insert the setscrew (186) again
(Torque 2.5 Nm).
• Turn the steering wheel back until the wheels
are facing the required direction.
• Tow the truck to its destination using the pull
rod.
The truck has now reached its destination.
Applying the parking brake
Procedure
• Remove the setscrew (187) from the stop of the cheese head screw (188)
• Assemble the floorboard.
Park the truck securely.
184
185 185
186
187
188