Jungheinrich DFG 316s, Operating Instructions Manual

Page: 34 / 187

35
05.10 EN
2.3 Loading with another industrial truck
WARNING!
The truck can be damaged
The truck to be loaded can get damaged when loading with another industrial truck.
X
Only trained specialist personnel should load the truck.
X
Use only trucks with sufficient capacity for loading.
X Only for loading and unloading.
X
The forks of the second industrial truck must be sufficiently long
X
Transporting over long distances prohibited.
Loading the truck with a second industrial truck
Requirements
– Park the truck securely, Siehe “Parking the truck securely” auf Seite 76.
Procedure
• Raise the truck with the forks at the side between the axles.
• Raise the truck slightly and make sure it is securely positioned on the forks. If
necessary adjust or secure the forks with stops.
• Carefully load/unload the truck, (see "Lifting, transporting and depositing loads" on
page 85).
• Lower the truck slowly onto the ground and prevent it from rolling away.
The truck is now loaded.