Jungheinrich DFG 316s Page 63 Operating Instructions Manual Download

Page: 63 / 187

05.10 EN

3.4

Setting up the operator position

WARNING!

Accident risk

Do not adjust the driver’s seat while travelling.

Procedure

• Before starting to travel, adjust the driver’s seat, steering column and armrest (if

necessary) so that all the controls are within reach and can be applied without
having to strain.

• Adjust the visibility aid equipment (mirrors, camera systems etc.) so that the

working environment can be clearly seen.

3.4.1 Adjusting the driver’s seat

WARNING!

Risk of accidents and damage to health

An incorrectly adjusted driver’s seat can result in accidents and damage to health.

Do not adjust the driver’s seat while travelling.

The driver’s seat should lock in position after adjustment.

Check and adjust the individual driver’s seat setting before starting to use the truck.

Hold the weight setting lever (129) only by the recess, do not reach through
underneath the lever.

Summary of Contents for DFG 316s




























































































































































































Search results

Summary of Contents for DFG 316s

Reviews:

Related manuals for DFG 316s

Brands by name

Popular brands

Jungheinrich DFG 316s, Operating Instructions Manual

Search results

Summary of Contents for DFG 316s

Reviews:

Related manuals for DFG 316s

Brands by name

Popular brands