107
05.10 EN
6.4
Automatic / mechanical folding gate
CAUTION!
A faulty folding gate can cause
accidents
X
Never use the truck with a non-
functional folding gate. Have the folding
gate checked by authorised specialist
personnel after an accident. Do not
modify the folding gate.
X
Always close the folding gate tightly and
make sure it is locked.
X
Closing the folding gate does not
release the driver from his responsibility
to wear a seat belt, (see "Seat Belt" on
page 69).
X
When the driver’s seat is occupied,
maintain a 90 mm gap between the gate
(157) and the seat to ensure safety.
Hazardous situations
If the truck is about to tip over, do not loosen the seat belt. The driver must not jump
off the truck. The driver must lean his upper body over the steering wheel and hold
on with both hands. Tilt your body in the opposite direction of fall.
Mechanical folding gate operation
Procedure
• To open, push the left gate in and at the same time lift it up.
• When the gate is released, it automatically moves forward and locks in position.
Automatic folding gate operation
Procedure
• To open, push the left gate in and at the same time lift it up. This prevents the truck
from travelling.
• Travel is activated again when the system has been closed.
157
Summary of Contents for DFG 316s
