05.10 EN
166
Adding engine oil
Procedure
• Add fresh engine oil through the filler port
(206) in accordance with the consumables
table.
• Check the engine oil level with the dipstick
(204) and top up if necessary, (see
"Consumables" on page 149).
• Screw the filler cap back on.
• Attach the floor plate.
NOTE
The incorrect amount of oil will damage
the engine.
X
After replacing the oil and oil filter carry
out a test run and check the oil pressure
display (86).
X
Check that the oil drain plug and oil filter
housing are tight.
6.7.6 Replacing spark plugs
Procedure
• Remove spark plug connector (215).
• Thoroughly clean around the spark plugs on
the cylinder head.
• Unscrew the spark plugs.
• Check the electrode distance of the new
spark plugs with a feeler gauge.
Z
Rated value: 1.0 mm ± 0.1mm.
• Screw in the spark plugs by hand and then
torque them to 25 Nm.
206
204
km/h
R
86
215
Summary of Contents for DFG 316s
