manualshive.com logo in svg

JUKI MF-7800D Series, Engineer'S Manual

Share
Download
JUKI MF-7800D Series Engineer'S Manual Download Page 88

– 84 –

2) Change of the setting

Setting of SC-500

FL ON : Auto-lifter device becomes effective.
FL OFF : Auto-lifter function does not work.

(Standard at the time of delivery)
(Similarly, the presser foot is not automatically lifted when programmed
stitching is completed.)

(Caution) 1. To perform re-turning ON of the power, be sure to perform after the time of one

second or more has passed.

(If ON/OFF operation of the power is performed quickly, setting may be not

changed over well.)

2. Auto-lifter is not actuated unless this function is properly selected.

3. When “FL ON” is selected without installing the auto-lifter device, starting is

momentarily delayed at the start of sewing. Be sure to select “FL OFF” when

the auto-lifter is not installed.

: Solenoid drives

: Air drive

: Automatic reverse feed

stitching effective

: Automatic reverse feed

stitching ineffective

Standard Adjustment

UT25

Summary of Contents for MF-7800D Series






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands