– 61 –
(1) Loosen setscrews
in the waste cloth pipe and remove waste
cloth pipe
.
(2) Remove setscrews
in the installing base cover, and remove
installing base cover
.
(3) Loosen lock nut
of the adjustment pin and move adjustment pin
up or down to adjust the stroke of the upper knife.
(4) The standard adjustment position is the position where the engraved
marker line A of adjustment lever
aligns with the engraved marker
line B of adjustment pin
. Loosen nut
and raise adjustment pin
to increase the stroke of the upper knife, and lower it to decrease
the stroke. After the adjustment, perform “5.-(20)-2)-3.
ADJUSTMENT PROCEDURE OF ENGAGEMENT AMOUNT OF
KNIVES”.
Adjustment Procedure
Results of Improper Adjustment
H21
Summary of Contents for MF-7800D Series
