– 13 –
1. Loosen setscrew
and move needle bar thread take-up thread
receiver
up or down to adjust the height.
2. When desired to make needle bar thread take-up thread receiver
work especially on the right needle where loop is hard to be made,
adjust the height of right needle thread receiver
with setscrew
.
1. Loosen setscrew
and move rocking thread take-up receiver
up or down to adjust the height.
2. When desired to make rocking thread take-up receiver
work
especially on the right needle where loop is hard to be made, adjust
the height of the right needle thread receiver
with screw
.
o When the needle bar thread
take-up thread receiver
is
raised, loop becomes large.
o When the needle bar thread
take-up thread receiver
is
excessively raised.
Adjustment Procedure
Results of Improper Adjustment
Summary of Contents for MF-7800D Series
