– 6 –
(Caution) In case of threading for standard seams, rocking thread take-up thread guide
is not used.
2. Threading for soft seams
(1) When soft seams are required, change the threading of needle thread and slide the position of looper thread
cam eyelet.
(2) Do not pass needle thread through needle bar thread take-up
. Pass the thread from rocking thread
take-up
to rocking thread take-up thread guide
.
(3) Other points are same as those of "1. Threading for standard seam".
1. Threading for standard seam
A
Broken lines
A
when stretcher thread is used
C
B
D
When covering thread is
excessively loosened =
B
When covering thread is
excessively loosened even
after passing
B
=
C
When covering thread is
excessively tense =
D
When using more
stretchable thread
When using less
stretchable thread
1. Adjust the bottom end of left-hand thread guide
to the engraved marker line on the front side.
2. Adjust the position of the hole of right-hand
thread guide to the left.
Standard Adjustment
5. STANDARD ADJUSTMENT
(1) Threading the machine head
(Caution) In case of the soft seams, rocking thread
take-up thread guide
is used.
E
In case of soft seams
Engraved marker line
Right
Left
Summary of Contents for MF-7800D Series
