JUKI MEB-3200 Series, Instruction Manual

Page: 64 / 520

50
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
A
B
0 to 0.5 mm
Adjust the clearance between the presser
foot and the holding plate to 0 to 0.5 mm.
Loosen two setscrews in the presser arm base
and the adjust the clearance. Then fix the presser
arm in place.
Moving presser arm in the direction A will
reduce the clearance between the presser
foot and the outside needle entry point.
＊
The front or rear inclination can be adjusted with
presser arm setscrew .
(6) Position of the presser foot and the needle entry point
●
Upper knife type
Loosen setscrew in the cloth cutting knife
installing base, adjust cloth cutting knife installing
base to the left or right. Then fi x the base.
●
Lower knife type
Loosen setscrews in the knife base and adjust
knife base to the left or right. Then fi x the knife
base.
(7) Adjusting the knife dropping position