JUKI MEB-3200 Series, Instruction Manual

Page: 48 / 520

34
(3) Compensation of turning
Turning angle of the eyelet section and of
the parallel section can be adjusted.
Set the turning angle with [RIGHT ] key or
[RIGHT ] key .
Setting can be performed − 14 ˚ to 14 ˚ .
(5) Eyelet crosswise compensation
Position on the top of eyelet can be
moved to the right- or left-hand.
Set the position with [RIGHT ] key or [RIGHT
] key .
Setting can be performed
−
0.6 to 0.6 mm in the
increments of 0.1 mm.
(6) Eyelet lengthwise compensation
Shape on the top of eyelet can be expanded
or contracted in the longitudinal direction.
Set the position with [RIGHT ] key or [RIGHT
] key .
Setting can be performed − 0.2 to 0.6 mm in the
increments of 0.1 mm.
(7) Left eyelet lengthwise compensation
Length of the left side on the top of eyelet
can be adjusted.
Set the length with [RIGHT ] key or [RIGHT
] key .
Setting can be performed
−
0.2 to 0.6 mm in the
increments of 0.1 mm.
(4) Parallel section turning compensation
Turning angle of parallel section and
bottom of eyelet can be adjusted.
Set the turning angle with [RIGHT ] key or
[RIGHT ] key .
W h e n t h e t u r n i n g c o m p e n s a t i o n o f t h e
a f o r e m e n t i o n e d ( 3 ) i s p e r f o r m e d , t h e
compensation is performed in the form of adding
the compensation value of turning of (3).
Setting range is − 14 ≦ compensation of turning ＋ compensation of turning at parallel section ≦ 14.
＋
−
−
＋
＋ −
−
＋
＋
−