Johnson Controls YORK YK MaxE, Operation Manual

Page: 78 / 184

JOHNSON CONTROLS
78
FORM 160.54-O1
Full Load Amps
Access Level Required : SERVICE
Defines the maximum amps at which the motor can op -
erate this value is viewable when logged in at VIEW or
OPERATOR level. Service Technicians refer to YORK
Service manual 160.54-M1. With software version
C.OPT.01.20.307 (and later), the maximum program-
mable value of this setpoint is equal to PROGRAMMED
DRIVE CURRENT (Modbus Address 40013) value
received from the MV VSD. In previous software ver-
sions, it was derived from a lookup table based on the
MOTOR RATED VOLTAGE and MV VSD Model.
KWH Reset
Access Level Required
: SERVICE
Allows the user to reset the cumulative Kilowatt Hours
to zero. Service Technicians refer to YORK Service
manual 160.54-M1.
optiView Control Center
NaVigatioN
Home
Access level Required : VIEW
Causes an instant return to the Home Screen.
ACC Details
Access Level required : SERVICE
Moves to a subscreen which provides more information
about the Adaptive Capacity Control.
Motor Lube
Moves to a subscreen allowing operator acknowledge-
ment of the compressor motor lubrication and viewing
of the compressor motor lubrication parameters.