JLG 680S, Service And Maintenance Manual

Page: 430 / 530

SECTION 6 - JLG CONTROL SYSTEM
6-14 3121234
GLOW PLUG:
5 0
1
2
NO GLOW PLUGS: No glow plugs installed.
AIR INTAKE: Glow plugs installed in the air intake on the manifold.
IN-CYLINDER: Glow plugs installed in each cylinder.
2
STARTER LOCKOUT:
6 0
1
DISABLED: Automatic pre-glow time determined by ambient air temperature; engine start can
be attempted at any time during pre-glow.
ENABLED: Automatic pre-glow time determined by ambient air temperature; engine start is NOT permitted
until pre-glow is finished.
0
FUEL CUTOUT
7*
* This menu item is only visi-
ble if non dual fuel engines
are selected. 0
1
2
RESTART: Engine allowed to be restarted multiple times when very low fuel level is reached.
ONE RESTART: Engine allowed to be restarted once for 2 minutes when very low fuel level is reached.
ENGINE STOP: Engine not able to restart when very low fuel level is reached.
0
ENGINE SHUTDOWN:
8 0
1
DISABLED: No engine shutdown.
ENABLED: Shutdown engine when coolant temperature is greater than 110 deg. C or the oil
pressure is less than 8 PSI.
1
Table 6-3. Machine Configuration Programming Information (Software Version P5.X)
Configuration Digit Number Description
Default
Number