JLG 680S, Service And Maintenance Manual

Page: 432 / 530

SECTION 6 - JLG CONTROL SYSTEM
6-16 3121234
ST TOUCH / SKYGUARD:
12 0
1
2
3
NONE: No soft touch or skyguard system installed.
SOFT TOUCH - Soft touch only installed.
SKYGUARD - Skyguard only installed.
BOTH (CUTOUT) - Soft touch and Skyguard installed.
0
GEN SET/WELDER:
13 0
1
NO: No generator installed.
BELT DRIVE: Belt driven setup.
0
GEN SET CUTOUT:
14*
* Only visible if Gen Set /
Welder Menu selection is
not 0. 0
1
MOTION ENABLED: Motion enabled when generator is ON.
MOTION CUTOUT: Motion cutout in platform mode only.
0
H & T LIGHTS:
15 0
1
NO: No head and tail lights installed.
YES: Head and tail lights installed.
0
CABLE SWITCH:
16*
* Only visible under certain
model selections.
* Certain market and model
selections will alter the
default setting. 0
1
NO: No broken cable switch installed.
YES: Broken cable switch installed.
0
Table 6-3. Machine Configuration Programming Information (Software Version P5.X)
Configuration Digit Number Description
Default
Number