JLG 680S, Service And Maintenance Manual

Page: 419 / 530

SECTION 6 - JLG CONTROL SYSTEM
3121234 6-3
Changing the Access Level of the Hand Held
Analyzer
When the analyzer is first connected, its access level ensures
that most configurations cannot be changed; this ensures that
a setting cannot be accidentally altered.
To change the access level, a PASSWORD must be entered; the
password must be known.
To enter a password, first find the appropriate top level menu
item:
MENU:
ACCESS LEVEL 2
Press ENTER to select the ACCESS LEVEL item; then
press UP & DOWN arrows and LEFT &
RIGHT arrows to enter the correct five digit password:
ACCESS LEVEL:
CODE 33271
When the correct password is displayed, press ENTER to
confirm it; the access level will change to match the password
(if not, press ENTER to check and correct the password).
The correct passwords will vary depending on the vehicle;
check the vehicle manual for more information.