![background image](http://html1.mh-extra.com/html/jcb/js-200-series/js-200-series_service-manual_3627661053.webp)
8 - 5
Adjusting the Fan Belt
!
!
WARNING
Make sure the engine cannot be started. Disconnect the
battery before doing this job.
2-3-3-5
1. Check the Fan Belt Tension
There must be 10 mm (0,4 in) slack at
D
on the belt.
2. Loosen the Alternator
Slacken bolts
A
and
B
.
3. Adjust the Fan Belt
Use tension bolt
C
to adjust the alternator so that there is
10 mm (0.4 in) slack at point
D
on the belt.
Note:
If the fan belt is stretched so much that it cannot
be adjusted correctly, fit a new belt (see below).
4. Secure the Alternator
Re-tighten bolts
B
. Then re-tighten bolt
A
.
Fitting a New Fan Belt
1. Loosen the Alternator
Slacken bolts
A
and
B
and adjust tensioner
C
so that the
fan belt can be removed.
2. Fit a New Fan Belt
With the alternator located as in
1
, fit a new belt, making
sure its 'V' profile locates in the pulleys correctly.
Note:
It may be necessary to apply slight leverage to the
new belt to get it over the pulleys.
3. Adjust the Fan Belt
Carry out steps
3
and
4
of
Adjusting the Fan Belt.
4 . Re-check the Fan belt Tension
After about 1 hour's running re-check the belt tension.
Section 3
Routine Maintenance
9803/6400
Section 3
8 - 5
Issue 1
Engine
(continued)
A
C
D
B
Summary of Contents for JS 200 Series
