![background image](http://html1.mh-extra.com/html/jcb/js-200-series/js-200-series_service-manual_3627661175.webp)
8 - 8
Section C
Electrics
9803/6400
Section C
8 - 8
Issue 2*
Self Test
Self Test Function
(continued)
When the desired
AUTOMATIC IDLE TIME
is reached, press
and hold the
RESET
switch for 20 seconds to enter the
setting into the controller. A buzzer will sound when the
setting is complete.
Turn the starter switch to
OFF
to silence the buzzer.
Other functions
Other functions, not applicable in normal use, can be
displayed using the
SELECT
button:
CH:1
= Min engine RPM for scrap magnet use.
CH:7
= Changing Proportional Solenoid mA Value.
If kerosene fuel is to be used it is necessary to reduce
the current at the proportional solenoid on the hydraulic
pump as follows:
1. Switch ignition on.
2. Press
CHANGE
button once.
3. Press
PATTERN
button once.
4. Press
SELECT
button repeatedly until monitor reads
CH:7
5. Press
H MODE
switch to change mA value.
(0=normal,1= reduced current).
6. Press
RESET
button for 20 sec until buzzer sounds.
7. Switch ignition off.
The proportional solenoid mA value is now reduced.
CH:8
= Battery level sensor.
Self-check
Message
WORK MODE
MODE
CLOCK
EA: B(RPM)
Reset
20 Seconds
*
*
*
*
*
*
*
Summary of Contents for JS 200 Series
