jcb JS 200 Series, Service Manual

Page: 510 / 531

6 - 2
Assembly
1. Install a new greased 'O'-ring J , to the grease
cylinder A .
Install a new back-up ring I .
2. Install the dust seal H using a suitable jig and hammer
to the grease cylinder A .
3. Coat the piston rod G with grease.
Insert the piston rod G into the grease cylinder A .
4.
Install the check valve
E
, with the grease nipple
F
, to
the grease cylinder A torque to 58.84 Nm (43.4 lb/ft).
Fasten the bracket D to the grease cylinder A using the
bolt B and washer C .
Section J
Track and Running Gear
9803/6400
Section J
6 - 2
Issue 1
Grease Cylinder (continued)
I
J
A
H
A
A
G
A
B
C
D
E
F