![background image](http://html1.mh-extra.com/html/jcb/js-200-series/js-200-series_service-manual_3627661377.webp)
77 - 4
Section E
Hydraulics
9803/6400
Section E
77 - 4
Issue 1
Hydraulic Rams
Reconditioning
(continued)
Bush removal
(continued)
Prepare a block and align the shaft centre while placing
the cylinder head on the block. Choose a block suitable in
shape and size from the table below.
1.
Position the block
(jig)
and cylinder head assembly
(retainer jig and chuck assembly)
underneath the
press.
2.
Gradually press the retainer
(jig)
upper surface until
the bushing falls out from the cylinder head
(the sound
of the bottom surface of the chuck assembly jig hitting
the work bench will be heard)
.
Note:
Normally it falls out with a load of less than 3 tons.
The press ram stroke varies with the cylinder head size
and is about 32~52 mm.
1.
Use a retainer when pressing.
2.
When the shaft centre of the block and cylinder head
assembly are not aligned, stop the press work and
move the block, aligning the shaft centre, and
proceed.
7. Block (jig) preparation
8. Removing bushing
Division d1
d2
h
Nominal
size
For ø 75
82
110
80
75
80
87
112
80
80
85
92
124
80
85
90
97
130
80
90
95
102
136
80
95
100
107
140
80
100
105
112
146
80
105
110
117
150
80
110
Summary of Contents for JS 200 Series
