92
CAUTION:
The magnetic clamp can damage items such as credit
cards, floppy disks etc.
Do not use the magnetic clamp near persons with a
pacemaker or other medical implants which may be
affected by the strong magnetic field.
Quilting with Embroidery Hoop ASQ27d
Embroidery hoop ASQ27d
Embroidery hoop ASQ27d is used for embroidering quilt
patterns on quilt layers.
There is no inner hoop but the quilt layers are held in the
hoop by means of the magnetic clamps.
q
Embroidery hoop ASQ27d
w
ASQ27d template
e
Magnetic clamps
ASQ27d template
r
Centerlines
t
Maximum area of embroidery
Calibrate the center position before use (refer to page 103).
q
w
e
t
r
e
z
x
q
w
c
r
Printing the design (template sheet)
Save the built-in embroidery pattern to a USB flash drive,
and print the design (template sheet) using the printing
function in Artistic Digitizer Jr.
Printing embroidery pattern ASQ27d #48
z
Press the editing mode key to open the editing
window. Press the hoop selection key to select
ASQ27d.
q
Editing mode key
w
Hoop selection key
x
Press the design selection key and select embroidery
hoop ASQ27d. Select embroidery pattern #48.
e
Design selection key
c
Insert the USB flash drive to the USB port located on
the right side of the sewing machine (refer to pages
110-111).
r
Save file key
NOTE:
•
USB flash drive capacity 64 GB and under is
recommended for this sewing machine.
• This model supports FAT16 and FAT32 formats only. If
the USB flash drive is not read, check its format (refer
to pages 124-125).
