65
Embroidery Lace Designs
You can attach the lace pieces in the “24. Designs for
water soluble stabilizer” category to a background fabric
with the lace designs in the “25. Designs for fabric”
category to achieve a three-dimensional appearance.
Lace designs in the “24. Designs for water soluble
stabilizer” require water soluble stabilizer for
embroidering.
Butterfly design
Example: Butterfly design (SQ10d #256)
z
Attach the water soluble stabilizer to the hoop.
Be sure that the stabilizer is stretched tightly in the
hoop.
Select “24. Designs for water soluble stabilizer”.
Press the next page key. Select design #3 in the “24.
Designs for water soluble stabilizer” page 2/2 and sew.
q
Next page key
c
Attach the background fabric to the carriage.
Select “25. Designs for fabric”. Press the next page
key. Select design #2 in the “25. Designs for fabric”
page 4/4 and sew the first and second sections (color).
q
Next page key
x
Remove the water soluble stabilizer from the hoop.
Trim away the water soluble stabilizer surrounding the
design pattern with scissors.
Remove the water stabilizer by soaking the butterfly
wing design in a bowl of warm water.
Be sure that the lace piece to be attached is
completely dried out after removing from water.
The butterfly wings part is completed.
w
Butterfly wing design
NOTE:
• Do not rub or scratch the Designs for water soluble
stabilizer.
• Refer to page 37 for how to use a water soluble
stabilizer.
z
q
x
c
w
q
