102
i
Thread Cutting
There are 3 thread cutting options for embroidery.
o
Easy setting
When this setting is turned on, the machine will trim the
threads if the jump thread is 3 mm or longer, or when the
machine stops to change the thread to the next color.
!0
Advanced setting
When this setting is turned on, you can configure the
Jump thread cutting
!1
, Cut at color change/end
!2
, and
Cutting Command
!3
options individually.
!4
Thread Selection
There are 9 types of embroidery thread to choose from.
Press the key of the thread you wish to use. The color
code and the selected brand are shown on the Ready to
Sew window. The color code and the selected brand are
also shown by pressing the color list key.
If you use imported embroidery stitch data containing
proper thread information, press the “Retain Orig. Color”
key to retain this information.
!4
-1 Retain original color key
Press the next page key to go to the next menu.
i
o
!0
!1
!2
!3
!4
!4
-1
!1
Jump Thread Cutting Length
When this option is turned on, the machine trims the
jump threads if the jump thread length is the same or
more than the set value.
!2
Cut at Color Change/End
When this option is turned on, the machine trims the
thread when it stops to change the thread to the next
color.
!3
Cutting Command
When this option is turned on, the machine trims the
threads at the trim code if the imported stitch data file
contains a trim command (cutting command).
Press the next page key to go to the next menu.
