52
Press the key
u
and a warning message will appear.
Press the OK key and the carriage moves to the left
upper corner of the basting area.
Press the jog keys
i
to move the carriage to the desired
position.
4. Custom trace and baste
The machine will baste around the embroidery area with
a 5 mm allowance when the
keys are pressed.
However, you can customize the tracing and basting area
size by pressing the key
t
.
You can set the tracing and basting area by indicating the
left upper corner and lower right corner of the tracing and
basting area.
Press the key
t
to open the custom trace and baste
window.
The size of the tracing and basting area is displayed in
the center of the window
y
.
Press the key
o
and the carriage moves to the right
lower corner of the basting area.
Press the jog keys
i
to move the carriage to the desired
position.
Press the trace key
!0
to trace the set area without
basting.
To trace and baste, pull the needle thread up to bring the
bobbin thread up on the needle plate (refer to page 30)
then press the start/stop button.
To return the trace and baste area to its default settings,
press the default key
!1
.
To close the tracing option window, press the X key.
4.
t
o
!0
y
i
!1
u
