19
NOTE:
• You can also change the setting with “+” or “–” key
and slide bar on the middle touch screen.
• You can also press the default key and the lockout
key on the middle touch screen.
u
Default key
o
Lockout key
Adjusting the LED pointer for positioning marker
embroidery foot PM
You can adjust the brightness and position of the LED
pointer.
Press the adjust key to open the adjusting window.
q
Adjust key
* You can also adjust the brightness of the LED pointer
and the position of the LED pointer on the middle touch
screen.
w
Middle touch screen
Adjusting the brightness of LED pointer
You can adjust the brightness of the LED pointer with the
LED pointer brightness key.
Press “+” or “–” key, or slide the slide bar up or down to
adjust the settings. Press the default key to recover the
original setting.
Press the close key to close the window.
e
LED pointer brightness key
t
Slide bar
u
Default key
i
Close key
Adjusting the LED pointer position
The LED pointer may not highlight the needle drop
position properly when attaching heavyweight fabrics to
the hoop. In this case, turn the handwheel or thumbwheel
and check the actual needle drop position, then adjust
the LED pointer position with the LED pointer adjustment
key.
Press “+” or “–” key, or slide the slide bar up or down
to adjust the settings. Press the default key recover the
original setting.
Press the close key to close the window.
r
LED pointer adjustment key
y
Slide bar
u
Default key
i
Close key
q
w
r
e
i
u
t
y
r
e
u
t
o
y
