25
t
i
x
w
q
z
n
b
,
.
m
v
!0
r
u
y
o
c
e
Winding the bobbin
b
Pass the thread to the bobbin.
Hold the thread with both hands and wind it around
the bobbin clockwise several times.
z
Raise the thread guide bar until it snaps.
Pass the thread through the guide on the thread guide
bar from behind.
q
Thread guide bar
x
Pass the thread under the right thread guide.
w
Right thread guide
c
Pass the thread under the bobbin winding tension
disk.
e
Bobbin winding tension disk
v
Put the bobbin on the bobbin winder spindle.
r
Bobbin
t
Bobbin winder spindle
NOTE:
You can adjust the bobbin winding speed (refer to
page 99).
n
Insert the thread into one of the slits of the flange
plate and pull the thread to cut.
y
Slit
u
Flange plate
,
Press the bobbin winding button. The right touch
screen will show the bobbin winding sign.
o
Bobbin winding button
When the bobbin is fully wound, it will stop spinning
and the bobbin stopper returns to its original position
automatically.
.
Remove the bobbin. Cut the thread with the thread
cutter (rightmost).
!0
Thread cutter (rightmost)
NOTE:
For safety purposes, the machine will automatically
stop 1.5 minutes after starting bobbin winding.
m
Push the bobbin winder stopper to the left.
i
Bobbin winder stopper
