
5-5
GO
-KARTS
B
U
MPERBOAT
S
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
503-304-8899
ENDURANCE CL
UTCH PLA
TES
TM
The back pad is held on by four nuts on the back
side of the back panel for a single kart, and six
nuts for a double. The back pad serves multiple
purposes; most karts utilize the upper back pad
bolts to mount the top of the seatbelts. When
installing the pad, take care not to over-tighten the
nuts. Replace torn or damaged pads that expose any
part of the back panel assembly.
The Sidewinder and Sidewinder Double seat back
pads are glued onto the body; there are no bolts
holding them to the frame or body.
When replacing, make sure all of the pad is
removed; the body must be free of old adhesive and
debris. Lightly sand the body surface to remove old
glue. Wipe and clean the surface. Apply contact
adhesive to the body and to the back of the new
seat pad and let it sit until tacky (see adhesive label
instructions).
Carefully apply the new seat pad to the body, taking
care to make sure it is aligned properly before it
touches the body, as the glue will adhere instantly.
Glued to body
We have replacment
pads. Call our parts
department today.
800-854-3140 or 503-304-8899