11-6
GO
-KARTS
B
U
MPERBOAT
S
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
503-304-8899
ENDURANCE CL
UTCH PLA
TES
TM
To remove the pilot jet, first remove the idle stop
screw. (It’s a good idea to count the number of turns
needed to remove them. Use this to get the idle
speed close to original on installation).
Pull up on the pilot jet setting device to remove.
Gently pry up on the pilot jet (it is held in place by
an “O” ring).
The jet can now be cleaned. To check it, use a pen
light to shine light though jet air path and visually
inspect the fuel passage for obstructions. A nice,
round pin hole should be visible (use Honda jet
cleaner tool 07JPZ-001010B).
NOTE: Any carb jet can build up with varnish or other
material that will not be dislodged with carburetor
cleaner or air blast; always hold up to the light and
verify a nice, clean, round hole.
GX240-270 Cool-Tek clutch kit
#1-00-K0001CT
#1-00-K0002CT
ENDURANCE CL
UTCH PLA
TES
TM
