8-20
GO
-KARTS
B
U
MPERBOAT
S
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
503-304-8899
ENDURANCE CL
UTCH PLA
TES
TM
To install the keepers, use a good pair of small,
snub-nosed pliers. Orient the spring so you are
installing the keeper from the open side of the
spring.
Gripping the keeper firmly on the back side, using
a 45° angle of approach, push the spring down
with the open end of the keeper, then simply roll
it toward the post while maintaining downward
pressure.
NOTE: It is always a good idea to use new springs
and keepers on any clutch overhaul.
45° angle
KEEPER INSTALLATION TIPS
45° angle
OIL CHANGE KITS
Oil should be changed in the engine and
the clutch every 100 hours of operation for
commercial go-kart use; that’s once a week at
many tracks. Save time and money on these oil
changes with the addition of an oil drain kit. The
oil drain kit includes hoses with quick-disconnect
fittings to allow easy connection to an oil extractor
and an oil dispenser.
Oil drain kit, engine & clutch (GX240-270)
See funpartsxpress.com for more information
