13-47
GO
-KARTS
B
U
MPERBOAT
S
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
503-304-8899
ENDURANCE CL
UTCH PLA
TES
TM
Loosen the 4 pan-head screws holding
the cover on the switch box (this is being
shown with switch box removed from the
bracket, but this process can be done without
removing the switch box from the kart).
SWITCH BOX REMOVAL/REPLACEMENT
To correct the problem created by a faulty switch box, the box can be replaced, however; it is a good idea to check the
connections inside the box, as a loose wire can easily be repaired.
FOLLOW THE STEPS BELOW.
Remove the negative cable from the battery pack (see page 13-12). Remove the electric component cover and unplug the
switch box from the interconnect board (perform this step only if the switch box is being removed from the kart).
Loosen the wire tension nut to allow
the wire to slide into the box and
allow the cover to be removed.
Visually inspect the switches, looking
for loose wires or connections.
