iWave iW-RainboW-G20M, Hardware User'S Manual

Page: 30 / 80

REL1.3
Page 30 of 80
RZ/G1M/G1N Qseven SOM Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
Pin
No.
Qseven Edge
Connector
Pin Name
Signal Name
CPU Ball Name/
Pin Number
Signal Type/
Termination
Description
81 USB_P5-/
USB_SSTX1- NC NA - NC.
82 USB_P4-/
USB_SSRX1- NC NA - NC.
83 /
US NC NA - NC.
84 /
US NC NA - NC.
85 USB_2_3_OC
# USB_2_3_OC NA I, 3.3V CMOS Over current sense for USB port 2
& 3.
Note: This pin is connected to On-
SOM USB Hub OCS2 pin.
86 USB_0_1_OC
# USB_0_1_OC NA I, 3.3V CMOS Over current sense for USB port 0
& 1.
Note: This pin is connected to On-
SOM USB Hub OCS1 pin.
87 USB_P3- NC NA - NC.
88 USB_P2- USB_HUB2OUT
_DM NA IO, DIFF USB Host port2 data negative.
Note: This pin is connected from
On-SOM USB Hub USBDM_DN2
pin.
89 NC NA - NC.
90 USB_HUB2OUT
_DP NA IO, DIFF USB Host port2 data positive.
Note: This pin is connected from
On-SOM USB Hub USBDP_DN2
pin.
91 USB_VBUS VBUS_BUS NA I, 5V Power USB VBUS Power.
92 USB_ID GPIO_USBOTG_I
D(GP1_11) CS1#/A26/
R1 I, 3.3V CMOS USB OTG ID to identify Host
&Device.
Note: GP1_11 is connected to this
pin as GPIO for implementing
USBOTG_ID.
93 USB_P1- USB_P1- USB0_DM/
AH31 IO, DIFF USB Port1 data negative (OTG).
Note: This pin is connected from
CPU USB0_DM pin.
94 USB_P0- USB_HUB1OUT
_DM NA IO, DIFF USB Host Port0 data negative.
Note: This pin is connected from
On-SOM USB Hub USBDM_DN1
pin.