nano3G AP Installation Manual
nano3G AP Hardware Installation
N3G_INST_300 v14.0 for N3G_2.85 © ip.access Limited 2012
Page 56
6.3
nano3G E8 AP and E16 AP Hardware Installation
6.3.1
Unpack the nano3G E8 AP or E16 AP
1)
Unpack the AP and its accessories.
Box contents may vary, but typically the box should contain the following:
• nano3G E8 AP or E16 AP unit with wall bracket attached
• Extraction tool for removing the AP from its wall bracket
• Injector unit for POE+
• Mains cable for the POE+ injector
2)
Check that the serial number on the AP unit matches the label on the box.
3)
Check that the items have not been damaged in transit.
For any damaged units, contact the supplier immediately for returns advice.
