nano3G AP Installation Manual
Pre-Provisioning a nano3G AP
N3G_INST_300 v14.0 for N3G_2.85 © ip.access Limited 2012
Page 23
12)
Click the required configuration file in the list, then click
Load
. The list will close
and the file name will be shown in the box for Server file.
3.2.4
Optional - Select an AP Template
13)
If any templates of the correct object type are available, the Template Selection
page will appear:
Optionally use this page to load a template for the AP. Typically the template can
contain a reference configuration for the AP according to the AP’s intended
location and/or usage.
For information on working with templates, see [OPM_415].
14)
To use a template, click the required template in the list, then click
Next
. If a
template is not required for this AP, click
Next
without selecting anything in the list.
3.2.5
Enter AP Identification Details
15)
The page for specifying AP identification details will appear:
Notice that the 3G AC Name, Management Server Address and Security Gateway
are set automatically according to the BSMIS object selected for invoking the
wizard. The 3G AC Name and Management Server Address may not be changed.
