nano3G AP Installation Manual
Pre-Provisioning a nano3G AP
N3G_INST_300 v14.0 for N3G_2.85 © ip.access Limited 2012
Page 21
6)
To copy the configuration from an existing AP, click the
Select
button. The Select
linked object browser will appear, initially showing the Root object in the NOS
object hierarchy. Drill down to find the required AP. For example:
The DN box will show the Distinguished Name for the selected AP. This uniquely
identifies the AP object within the object hierarchy on this NOS. The AP object
must be the same type of AP object as has been selected for the new site.
7)
Click
OK
and the DN will be shown on the AP Selection page of the wizard.
3.2.3
Optional - File Selection
8)
Click
Next
and the File Selection page of the wizard will appear:
Optionally use this page to load a configuration file for the AP. The three options
for file sources are:
• Do not load a file - no configuration file will be loaded - if preferred, it is
possible to load a configuration file later using the Load Attributes Wizard
